Ba8Tech K3 Pro Thermometer Wall-mounted Automatic Temperature Measuring #BA9241454

Description

Professional Wall-mounted Automatic Temperature Measuring Forehead Infrared Thermometer with LCD Display

This professional version can measure temperature far from 5~10 meters at 0.1S short time, it has IO signal output to connect with other electronic devices and it can be save into computer too.

Features:
* Non-contact, no need to hold, to avoid cross infection.
* Using new chip, the induction time is faster (0.5s), the pass rate is greatly improved (50 people /min).
* High temperature measurement accuracy:±0.2 (34~45℃)
* With warning light for detection failure and abnormal temperature.
* Can be connected to USB power supply, charging treasure, 4 AA batteries.
* High-definition LCD display, 5 meters viewing distance.
* Intelligent photosensitive forehead thermometer, can be Nail hooked/bracket fixed, etc.
* We have opened up new markets beyond handheld thermometers and thermal imaging temperature measurement doors
* Can be applied in different occasions. Office/Subway/Family/Superstore/Shop/ Community/Entrance etc.
* Support real-time temperature data export function and data query function when connected to computer
* Supports storage function, storing 30 sets of measurement data
* Support IO signal output, switch signal / pulse signal
* Support setting five levels of volume
* Support setting backlight switch
* Support to set the upper limit of 37-38℃ alarm
* Support voice broadcast, body mode broadcast: “normal” “abnormal”. Surface mode broadcast: measuring temperature data
* Photosensitive distance sensor, under non-strong light, supports outdoor measurement, better than ordinary infrared sensor
* Continuously refresh the measured environment temperature and display it continuously on the screen 19. Support automatic standby and shutdown state, ultra-low power consumption value

Specification:
* Measurement techniques: No contact on forehead of infrared thermometer
* Method of measurement: Sensitivity sensor distance sensor
* Temperature Unit: ℃/℉
* Accuracy: ±0.2 (34~45℃)
* Measuring distance: 5 ~ 10 cm
* Display: 2.8-inch LCD screen
* Install Method: Nail hook/bracket fixing
* Power supply: USB /4 AA batteries
* Response time: 0.5s
* Working band: 5 microns
* Standby time: 30 s
* Product Size: 170*115*140mm
* Net weight: 303g
* Operating mode: Surface mode /body mode / Count mode
* Surface temperature measurement range: 10–50℃
* Range of Body Mode temperature: 35–42℃
* Environment temperature: 10–40℃
* Counting capacity: 9999 times
* Record temperature data: Support to review 30 sets of data
* Alarm Function: Flash+sound alarm for about 10 seconds
* IO signal output: Support(switch signal / pulse signal)
* Body storage: Support
* Environment temperature measurement: Support(continuous refresh measurement)
* Volume setting: Support(five levels of volume setting)
* Backlight switch: Support
* Upper alarm limit: Support(37–38℃)
* Connect to the computer: Support
* Voice broadcast: Support
* Automatic shut-down: Support
* Whether to support charging: Not support
* Whether to support outdoor measurement: Support (not under direct light)